Toyota VELLFIRE 2010 Manual page 265

Machine Translated by Google
knowledge
ÿ About setting conditions
•Can be set when the shift lever is in D or S, 4 or more ranges.
•Vehicle speed can be set in the range of about 40 to about 100km/h.
ÿ Acceleration after vehicle speed setting
-You can accelerate with the accelerator just like normal driving. After accelerating, it returns to the set vehicle speed.
•Even if you do not cancel the cruise control, accelerate to the desired speed and release the lever.
You can change the set vehicle speed by lowering it.
ÿ Automatic cancellation of constant speed running
Constant speed running is automatically canceled in the following cases.
•The actual speed is about 16km/h or more lower than the set speed.
•The actual speed is about 40km/h or less.
• VSC has been activated
• TRC has been activated for a certain period of time
• TRC or VSC turned off
When the multi-information display shows "Cruise control malfunction. Please check at your dealer" while driving at a
constant speed.
Turn off the system once with the ON-OFF switch and set it again. If the setting cannot be made or it is
canceled immediately, there may be a system malfunction. Have it checked at a Toyota dealer.
4-5. Driving support equipment
263
4 driving