Toyota VELLFIRE 2010 Manual page 269

Machine Translated by Google
Setting the vehicle speed (vehicle distance control mode)
Press the ON-OFF switch to turn on the system.
1
The radar cruise control (with
all vehicle speed tracking function) indicator
lights up and a message appears on the multi-
information display.
Press the switch again to turn it off.
Accelerate/decelerate to the desired vehicle speed
2
(approximately 50 to 100km/h) by operating the
accelerator pedal, and lower the lever to set the speed.
The cruise control set indicator light will illuminate.
You can drive at a constant speed at the vehicle speed when the
lever is released.
If the vehicle speed is less than 50km/h and the vehicle ahead can be detected, the set speed will be
set to 50km/h and the vehicle will follow the vehicle ahead.
4-5. Driving support equipment
267
4 driving