Toyota VELLFIRE 2010 Manual page 332

Machine Translated by Google
330 4-5. Driving support equipment
Note
•If the target parking position is misidentified, such
as when the blue frame or avoidance pole is on
the parked vehicle, change the parking position.
•Make sure that there are no obstacles in the blue
frame or between your vehicle and the target
parking position, and that the avoidance pole is
not hanging on the parked vehicle or wall. If there
is an obstacle in the blue frame or between your
vehicle and the target parking position, or if the
avoidance pole is hanging on the parked vehicle
or wall, please do not use the garage parking
assist mode because it will contact. .
•If there are steps or slopes on the road surface, the target parking position cannot be set in the correct
position, so the parking position may shift or the vehicle may tilt. Do not use Garage Assist mode in
such locations.
• When parking in a narrow space, approach the adjacent vehicle. When contact is likely
Depress the brake pedal to stop.
Since it may not be possible to detect low obstacles, directly confirm the safety of the surroundings and avoid contact.
If there is a risk, depress the brake pedal to stop the vehicle.
The parking position may shift or the vehicle may tilt depending on the surrounding environment such as the parked vehicle.
increase. Align manually if necessary.
hanging on the vehicle
hanging on the vehicle