Toyota VELLFIRE 2010 Manual page 365

Table of Contents

Advertisement

Machine Translated by Google
knowledge
ÿ To stop VSC and TRC
To deactivate TRC and VSC, press when stationary
The VSC OFF indicator lights up, and "TRC turned off" appears on the multi-information display. *
once again
*
Vehicles equipped with PCS (pre-crash safety system) also stop the pre-crash brake assist/pre-
crash brake. The PCS warning light will illuminate and a message will appear on the multi-
information display. (ÿ P.371)
ÿ
"TRC Off" appears on the multi-information display without pressing
is displayed, the TRC is in a state
where it cannot operate. Please consult your Toyota dealer.
ÿ
ABS, Brake Assist, VSC, TRC, Hill Start Assist Control
Operating noise
and vibration When the above system operates, the following phenomena may occur, but they are not
abnormal.
ÿ Vibration is felt in the vehicle body and steering wheel
ÿ Motor noise can be heard even after the vehicle has stopped
ÿ When the ABS is activated, the brake pedal moves in small increments.
ÿ After the ABS has finished operating, the brake pedal is pushed back a little.
ÿ ECB operation sound
You may hear the ECB operating sound in the following cases, but this is not a malfunction.
• Operating sounds heard from the engine compartment when operating the brake pedal
-Brake system motor that can be heard from the front of the vehicle when the driver's door is opened
Sound ("Gee" sound)
•When 1 to 2 minutes have passed after the hybrid system has stopped, the operation that can be heard from the engine room
Dynamic sound ("click", "whoosh", "jee")
Press to return to system ready state.
4-5. Driving support equipment
Press and hold for 3 seconds or more
363
4 driving

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents