Toyota VELLFIRE 2010 Manual page 280

Machine Translated by Google
278 4-5. Driving support equipment
clearance sonar
Clearance sonar uses ultrasonic sensors to detect the approximate distance between
the vehicle and obstacles while driving at low speeds (approximately 10km/h or less),
and displays the information on the multi-information display and navigation screenÿ in
the meter. It is an auxiliary device that notifies the driver by displaying the distance and
beeping.
Position and type of sensor
front corner sensor
1
Front sensor (vehicles equipped with
2
Intelligent Clearance Sonar) Rear
corner sensor
3
back sensor
Four
Front side sensors (vehicles equipped
Five
with Intelligent Parking Assist 2) Rear
side
sensors (vehicles equipped with Intelligent Parking Assist 2)
6
Switching clearance sonar
You can switch between ON (operate) and OFF (stop) in the "Settings" of the multi-
information display. (ÿ P.96)
Select ON to illuminate the clearance sonar indicator lights.
If you select OFF to stop the clearance sonar, turn ON again from "Settings" on
the multi-information display,
The clearance sonar will not return unless the system is activated.
(It does not reset by operating the power switch.)
ÿ: Equipment may or may not be available depending on the grade and options.