Machine Translated by Google
Connect the booster cables in the following order
Four
Connect the red booster cable to the rescue terminal of your vehicle
1
Connect the other end of the red booster cable to the + terminal of the rescue vehicle
2
battery
Connect the black booster cable to the - terminal of the battery of the rescue vehicle.
3
Connect the other end of the black booster cable to the unpainted metal part (fixed part
Four
as shown)
Start the engine of the rescue vehicle, increase the speed a little, and charge the auxiliary battery
Five
of your vehicle for about 5 minutes.
Open or close any door with the power switch turned off
6
With the rescue vehicle's engine running, turn the power switch to ON mode and then start
7
the hybrid system.
Confirm that the READY indicator lights up
8
If the light does not come on, contact your Toyota dealer.
After the hybrid system has started, disconnect the booster cables in the reverse order of
9
connection.
Close the rescue terminal cover and reinstall the fuse box cover.
Ten
Even if the hybrid system starts, have it checked by a Toyota dealer as soon as possible.
Four
3
7-2. How to deal with emergencies
1
2
537
In case of 70,000