Toyota VELLFIRE 2010 Manual page 450

Machine Translated by Google
448 6-2. Simple inspection and parts replacement
How to close
1
While supporting the bonnet, remove the bonnet stay and store it in the holder. Slowly lower the bonnet to
a height
2
of about 20 cm from the vehicle body. Drop the hood to close it and confirm it is locked.
3
knowledge
ÿ When opening the hood
Handle the bonnet stay by holding the resin
part. Also, if you need to open the hood
immediately after driving, be especially careful
not to touch the metal parts as the hood stays
may be hot.
ÿAuxiliary battery This
vehicle's auxiliary battery is located inside the
luggage compartment cover and is not installed
in the engine
compartment. When the auxiliary battery is
dead, use the rescue terminal in the engine
room to take measures. (ÿ P.536)
caveat
ÿ For repairs, vehicle inspections, and maintenance checks
Since it is necessary to switch to maintenance mode, be sure to consult your Toyota
dealer. Because it uses a high voltage system, mishandling could result in serious
injury or, in the worst case, death.
ÿConfirmation after engine room inspection
Make sure you have not left tools or cloths in the engine compartment. If tools
or cloths used for inspection or cleaning are left in the engine compartment, it may
cause malfunction, and the high temperature inside the engine compartment may
lead to a vehicle fire.
resin part