Toyota VELLFIRE 2010 Manual page 176

Machine Translated by Google
174 3-3. Seat adjustment
Position memory
You can register your preferred driving position (seat position, door mirror angle)
and call it with a single touch. Up to 3 patterns of driving positions can be
registered.
that the shift
lever is in the P position Turn the power switch to
1
ON mode Adjust the angle of the
2
driver's seat and door mirrors to your desired position
3
While pressing the SET button or
Four
after pressing the SET button
Press the button you want to
register from 1 to 3 within 3
seconds until the buzzer sounds.
If it has already been registered to the same
button, it will be overwritten.
ÿ How to call
Make sure the shift lever is in the P position
1
Set the power switch to ON mode Press
2
the button for the position you want to call from 1 to 3 until the buzzer
3
sounds
knowledge
ÿ When you want to stop the call operation of the position in the middle
Do one of the following:
•Press the SET button
•Press buttons 1 to 3
•Operate one of the seat adjustment switches (only the seat stops operating)
ÿ Seat positions that can be registered (ÿ P. 154)
All positions can be registered.
ÿ Operation after power switch OFF
Press the desired position button within 180 seconds after opening the driver's door or
within 60 seconds after closing the driver's door to adjust the seat position.
ÿ How to register Confirm