Toyota VELLFIRE 2010 Manual page 316

Machine Translated by Google
314 4-5. Driving support equipment
Parallel parking method (route display mode)
ÿ Viewing the screen (navigation screen)
It can be used by shifting the shift lever to R. When the shift reverse
interlocking function (ÿ P. 329) is ON, the reverse parking function (ÿ P. 322) operates when the
shift lever is set to R. If you want to display only the guide lines on the navigation
screen without activating the reverse parking function, turn off "Reverse interlock" in "Settings"
on the multi-information display. (ÿ P. 96) Estimated course line (yellow) Indicates the
approximate course of the vehicle's reversing course.
1
Linked with handle operation.
Vehicle width extension
2
line (blue) Indicates the route when the
vehicle is backed up straight. ÿ It
is displayed wider than the actual vehicle
width. ÿ
When the steering wheel is straight
(straight ahead), it overlaps with the
expected course line.
Distance reference line (blue, about
3
0.5m) Indicates the distance behind the
vehicle (from the rear end
of the bumper). ÿ Indicates about 0.5m ahead
Distance reference line (red approx. 0.5m) (yellow approx.
Four
1m) Indicates the distance behind the vehicle (from the rear end of
the bumper). ÿ Linked with steering wheel operation. It moves with the
expected course line. ÿ Approximately 0.5m ahead (red) and 1m ahead (yellow) are
indicated at each center position. • If the steering wheel is not straight (straight ahead), an error will occur.
In the above screen, the distance indicated by the distance reference line (red: approx. 0.5m
ahead, yellow: approx. 1m ahead) is displayed closer to the right and farther to the left.
Rear end of bumper
front of car