Toyota VELLFIRE 2010 Manual page 374

Machine Translated by Google
372 4-5. Driving Support Device
caveat
ÿ Handling the radar sensor
Observe the following to ensure that the pre-crash safety system is effective. Failure to do so may
result in the sensor not working properly, leading to an unexpected accident.
•Always keep the sensor and grill cover clean.
When cleaning, use a soft cloth so as not to damage the sensor or grill cover.
Avoid strong impacts around the sensor
Misaligned sensors can cause system malfunctions or abnormalities. If the sensor or its
surroundings receive a strong impact, be sure to have it checked and adjusted by a Toyota
dealer.
• Do not disassemble the sensor.
• Do not attach accessories or stickers around the sensor or grill cover.
don't buy
•Do not modify or paint the sensor or grille cover •If you need to replace
the sensor, please consult your Toyota dealer.
•The sensor conforms to the standards of the Radio Law. The label affixed to the sensor is proof
of this. Do not remove it. Also, you may be punished if you disassemble or modify the sensor.
ÿ Points to note regarding system support
The pre-collision safety system assists the driver in the process of "seeing," "judgement," and
"operating" in order to assist collision avoidance through warnings and brake control. Due to
system support limitations, please note the following:
• Contents of support in the process seen by the driver
The pre-collision safety system only detects obstacles in front to the extent possible, and is not
a system that allows distracted driving or distracted driving, nor a system that assists driving in
poor visibility. Drivers themselves must pay attention to their surroundings. • Contents of support
in the process of
driver's judgment
The pre-collision safety system judges the possibility of a collision based only on the information
of detectable obstacles ahead. It is the driver's own responsibility to make decisions about how
to ensure safety.
• Contents of support in the process of operation by the driver
The braking control of the pre-collision safety system is activated when a collision is determined
to be unavoidable, and does not avoid collisions or bring the vehicle to a safe stop without
appropriate driver intervention. Therefore, if there is danger, you must ensure your own safety.