Toyota VELLFIRE 2010 Manual page 472

Machine Translated by Google
470 6-2. Simple inspection and parts replacement
knowledge
ÿ After replacing the fuse
•If the lamps do not turn on even after replacement, replace the bulbs.
(ÿ P.471)
•If the fuse blows again after replacing the fuse, have it inspected by your Toyota dealer.
stomach.
ÿWhen excessive load is applied to the circuit from the auxiliary
battery, the fuse is designed to blow before the wiring is damaged.
caveat
ÿ To prevent car breakdowns and vehicle fires
Please observe the following.
Failure to do so may result in vehicle breakdown, fire, or injury.
• Do not use a fuse other than the specified capacity or anything other than a fuse.
stomach.
•Be sure to use genuine Toyota fuses or equivalents.
• Do not modify the fuse or fuse box.
ÿ About the fuse box near the power control unit
Never inspect or replace the product because there are high voltage parts and high voltage
wiring nearby. Improper handling may result in electric shock, serious injury or, in the worst
case, death.
Note
ÿ Before replacing the fuse
If the cause of the blown fuse is found to be electrical overload, have the vehicle inspected by
your Toyota dealer.