Toyota VELLFIRE 2010 Manual page 186

Machine Translated by Google
184 3-3. Seat adjustment
To set the rear seat full-flat mode
Stop the car and apply the parking brake firmly. Retract
1
the seat belt of the center seat of the third seat (ÿ P. 30)
2
Retract the armrest of the third seat (ÿ P. 170) Move
3
the third seat all the way forward (ÿ P. 170) Remove the
Four
headrest of the third seat. (ÿ P. 179) The center seat
Five
headrest is stowed in the luggage compartment. (ÿ P. 181)
Fold the backrest of the third seat all the way back (ÿ P. 170)
6
Move the third seat back until it touches the back door (ÿ P. 170)
7
Stow the
armrestÿ of the second seat (ÿ P. 170) (ÿ P. 167) Move
8
the second seat all the way forward (ÿ P. 158) Move the
9
left and right position of the second manual seat to the center (ÿ P.
Ten
158) Remove the
second seat headrest (ÿ P. 158) (ÿ P. 179) Fold the
11
backrest of the second seat all the way back (ÿ P. 158) Move the
12
seats as necessary so that there
13
is no gap between the second
and third seats (ÿ P. 158,
170)
To set the front/second full-flat mode
Stop the car and apply the parking brake firmly
1
Retract the center seat belt of the third seat (ÿ P. 30)
2
Retract the armrest of the third seat (ÿ P. 170) Move
3
the third seat all the way back (ÿ P. 170) Retract the armrestÿ
Four
of the second seat Yes (ÿ P. 167) Move the second seat
Five
all the way back (ÿ P. 158) Move the front seat all the way
6
forward (ÿ P. 154)
7
ÿ: Equipment may or may not be available depending on the grade and options.