Toyota VELLFIRE 2010 Manual page 511

Machine Translated by Google
knowledge
ÿ After using jacks and tools
Follow the steps below to install it in the vehicle. If the jack/tool bag is not
installed correctly, it may cause abnormal noise while driving.
Place the jack on the storage section,
1
rotate part A to fix the position, and
then tighten firmly with a force of about
2.0 to 4.0 N•m (0.2 to 0.4 kgf•cm). ° to
180 °)
Hang the hook of the band that secures the tool bag
2
to the B hole.
How to take out emergency tires
Flip up the third seat on the driver's side (ÿ P. 185) Remove the
1
deck board on the driver's side
2
remove the clasp
3
Use the wrench provided in the vehicle if the
temporary tire fasteners are too tight to turn. (When
fixing the tires, attach the fasteners by hand. Do
not use tools such as wrenches.)
7-2. How to deal with emergencies
509
B.
In case of 70,000