Toyota VELLFIRE 2010 Manual page 241

Machine Translated by Google
ÿ When the parking brake is automatically applied while the brake is being held
When starting, release the parking brake by one of the following operations. •Step on
the accelerator pedal while wearing the driver's seatbelt •While stepping on
the brake pedal, operate the parking brake switch to release it manually (ÿ P. 235)
After operating, check that the parking brake indicator light has turned off. (ÿ P. 234) ÿWhen
inspection is
required at a Toyota dealer
If the brake hold standby indicator light (green) does not light up even if the brake hold switch is
pressed when the operating conditions for the brake hold system are met, there may be a system
malfunction. Have it checked by a Toyota dealer immediately.
ÿ When "BrakeHold failure" is displayed on the multi-information display
Kiha
There may be an abnormality in the system. Have it checked by a Toyota dealer immediately.
ÿ About warning messages and warning buzzers
A warning message and buzzer will alert you when you need to be careful with the operation or
when an abnormality occurs in the system. If a warning message appears on the multi-information
display, follow the instructions on the displayed screen.
ÿ When the brake hold operation indicator light (yellow) flashes
ÿ P.498
caveat
ÿ On steep slopes
Be careful when using the brake hold system on steep slopes. The brake hold system may not
be able to hold the brakes on steep slopes.
ÿ On slippery roads
You cannot stop the vehicle beyond the grip limit of the tires. Avoid using on slippery road
surfaces.
4-2. How to drive
239
4 driving