Toyota VELLFIRE 2010 Manual page 338

Machine Translated by Google
336 4-5. Driving support equipment
Assume a normal reversing operation posture, place your hand lightly on the steering
7
wheel so as not to apply force, directly check the safety behind and around the parking
space, check that there are no obstacles in the parking space, and then apply the brake
pedal. Slowly reverse while
adjusting the vehicle speed by stepping
output saying, ""Beep" assist will be stopped. To resume assist, press the IPA switch.",
and the assist will be interrupted. increase.
• The blue frame displayed on the screen is almost the same size as your vehicle. (The
blue frame displayed when setting the target parking position is displayed in the size of
a general road parking frame.)
If you cannot enter
fart
8If you do not need to switch back: Go to step
When you hear a "pop" sound and the
8
stop display (ÿP. 307) lights up, depress
the brake pedal to stop.
Move the shift lever
9
*
D contains the S position.
If you want to end the assist at the position where the vehicle is currently stopped, move the
shift lever to P.
on .
the target parking position at once and need to turn back: Procedure
14
to D * when the voice says, "Please shift to drive."
If the vehicle reverses too fast, a voice will be