Toyota VELLFIRE 2010 Manual page 284

Machine Translated by Google
282 4-5. Driving support equipment
ÿ When obstacles are detected at the front and rear of the vehicle at the same time
• When an obstacle is detected on the front or rear side and the buzzer sounds
continuously, if a new obstacle is detected on the opposite side (front or
rear), the buzzer sounds repeatedly. . • When an obstacle is detected
on the front or rear side and the buzzer sounds continuously, the buzzer sounds
" Beep beep beep" is repeated.
You can change the volume and timing of the buzzer. • Vehicles
with navigation system: ÿ P. 283 • Vehicles without
navigation system: ÿ P. 561
Obstacle sensing range
Approx. 100cm (approx. 1.0m)
1
ÿ Approx. 150cm (approx.
2
1.5m) Approx. 60cm
3
(approx. 0.6m) ÿ The sensing range
is shown on the right. However, if
an obstacle is too close to the
sensor, it cannot be detected. • See
page 286 for side area obstacle
detection.
ÿ Depending on the shape and conditions of the
obstacle, the distance at which it can be
detected may be shortened or may not be detected.
You can change the range that can detect obstacles. •
Vehicles with navigation system: ÿ P. 283 • Vehicles
without navigation system: ÿ P. 561
ÿ: Equipment may or may not be available depending on the grade and options.