Toyota VELLFIRE 2010 Manual page 352

Machine Translated by Google
350 4-5. Driving support equipment
Precautions for use
ÿ Regarding the area shown on the screen
The area behind the car (area shown in the figure
on the right) is shown from the
rear end of the bumper. • Depending on the
condition of the vehicle and the road
surface, the imaged range may vary. • There is a
limit to what the camera can capture, and
objects near both ends of the bumper and
under the bumper are not captured.
• Since the Intelligent Parking Assist
2 camera uses a special lens, the
sense of distance in the image
displayed on the screen differs
from the actual distance.
ÿ About the camera
It is mounted above the license plate.
• Care for the camera
If the camera lens is dirty, you will not get a clear image. If water
droplets, snow, mud, or other contaminants adhere to the camera, rinse the
camera with plenty of water, and then wipe the camera lens with a soft cloth
moistened with water.
The area near both ends of the bumper is not reflected.