Toyota VELLFIRE 2010 Manual page 379

Machine Translated by Google
Switching the wiper stop position (cold region model)
The wiper stop position can be switched to the winter stop position. If a large
amount of snow accumulates on the windshield, the wipers may not be able to move up
and the wiper motor may be damaged, so switch from the standard stop position to the
winter stop position.
Hold the hook of the wiper arm and pull
it up along the glass surface.
Do not pull up by holding only the
wiper blade. Doing
so may deform the blade. Be sure
to
hold the hook part.
ÿ When returning to the standard stop position
Push the top of the hook along the glass
surface by hand.
ÿ To switch to the winter stop position
4-6. Driving Advice
hook part
377
4 driving