Removing the
Mainframe Cover
Chapter 5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
1. Turn off the mainframe and remove the power cord.
2. Remove the rear panel. Refer to "Removing the Rear Panel from the
Mainframe" on page 209 for instructions.
3. Remove the mainframe cover by removing the ten m3x6 flat head
torx screws (five on each side of the mainframe). Refer to Figure 5-2.
Figure 5-2. Removing the Mainframe Cover
Remove 5 Screws From Each Side
Getting Started 211