STATus:QUEStionable:VOLTage:LEVel? <supply>[,MIN|MAX]
Parameters
Returned Data
Comments
Reset Condition
Related
Commands
122 Programming the Enhanced Monitor
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The
STATus:QUEStionable:VOLTage:LEVel?
representing the last measurement of the power supply voltage.
Name
Type
<supply>
enumerated P24, P12, P5,
N2, N5PT2, N12
N24, P5STby, P5EXt
optional
optional
MIN, MAX
parameter
enumerated
Type
Range
float32
•
The measurement returned is the last measurement made on the supply
identified with <supply>. Under normal operation, this should be within the
last 2 seconds. Voltage is not measured during a *TST? or CAL? operation, so
a query to
STAT:QUES:VOLT:LEV?
before the long operation was entered. If the power of the mainframe is off,
this query will return the last measurement made before power turned off.
•
The optional MIN and MAX parameter allows the power supply's voltage
limits to be queried.
STAT:QUES:VOLT:LEV? P5, MAX
warning point for the 5V supply.
*RST does not affect the status system.
STATus:QUEStionable:VOLTage:EVENt?,
STATus:QUEStionable:VOLTage:CONDition?,
STATus:QUEStionable:VOLTage:ENABle?,
STATus:QUEStionable:VOLTage:ENABle
query returns a floating number
Range
Default
none
Indicates which power supply
current is being queried
none
When added after <supply>,
queries the maximum and
minimum voltage limits.
Default
None
power-supply voltage
will return the last measurement made
Description
Description
will return the limit
Chapter 3