SYSTem:COMMunicate:SERial:CONTrol:RTS <rts>
SYSTem:COMMunicate:SERial:CONTrol:RTS?
Parameters
Returned Data
Comments
Reset Condition
132 Programming the Enhanced Monitor
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SYSTem:COMMunicate:SERial:CONTrol:RTS
To Send (RTS) output line. RTS can be a static state (ON/OFF), or it can be used as
a hardware handshake line (IBFull).
SYSTem:COMMunicate:SERial:CONTrol:RTS?
the control value for RS-232 communication. The string is either "ON", "OFF", or
"IBF."
Name
Type
Range
<rts>
enum ON, OFF, IBFull
Type
Range
enum.
ON, OFF IBF
RTS setting
•
RTS ON means the RTS line is asserted; OFF means the RTS line is
unasserted.
•
RTS IBFull means that while the input buffer is not yet full, RTS is asserted.
When the buffer becomes full, RTS becomes unasserted.
*RST resets RTS to the last value saved by the SYST:NVS command.
controls the behavior of the Request
returns a string (enumerated) with
Default
Description
ON
RTS can be a static state (ON/OFF), or it can
be used as a hardware handshake line
(IBFull).
Description
Chapter 3