Ieee Common Commands - Agilent Technologies VXI 75000 Series User And Service Manual

Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
These commands are defined in the IEEE 488.2 standard and are found on most
SCPI instruments.
Syntax:
*CLS Clear all status groups and empties the error queue.
*ESE <mask> Sets enable register of the standard event status group
*ESE? Returns enable register of the standard event status group
*ESR? Return events of the standard event status group
*IDN? Return the SCPI Identification String
*OPC Sets the operation complete bit when pending events finish
*OPC? Returns 1 when pending events are finished
*PSC Sets the power-on state clear flag
*PSC? Returns the power-on state clear flag
*SRE <mask> Sets the service request enable mask for the Status Byte
*SRE? Returns the service request enable mask for the Status Byte
*STB? Returns the contents of the status byte
*RST Sets the module to a known state
*TST? Returns the self-test result
*WAI Waits for all pending operations to complete

IEEE Common Commands

Description
Programming the Enhanced Monitor 173