Table of Contents
Advertisement
WARNING
AVERTISSEMENT
Removing the Rear
Panel from the
Mainframe
Chapter 5
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table 5-2. Agilent E8400A Replacement Assemblies
Assembly
Impeller (backplane fan)
No operator serviceable parts inside mainframe or power
supply. Refer servicing to trained service personnel.
Les pièces à l'intérieur de l' unité central ou de l'alimentation ne
sont pas réparables par l'opérateur. Confiez l'entretien à du
personnel qualifié.
For most service work, you will need to remove the rear panel from the
mainframe. Figure 5-1 shows the procedure.
1. Remove the 14 screws from the rear panel.
2. The rear panel hinges at it top; rotate the panel upward. Pull the panel
out from the mainframe.
3. To replace the panel, insert the three tabs into the slots at the top of
the mainframe. Rotate the panel down until it is flush against the
mainframe. Replace all 14 screws.
Agilent E8402A
Agilent E8404A
Part Number
E8400-68501
Getting Started 209
Part Number
E8400-68501
Advertisement
Table of Contents
