SCPI Command Reference
Subsystem
Syntax
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The following section describes the SCPI commands for the Agilent E8402A
Enhanced Monitor. Commands are listed alphabetically by subsystem and also
within each subsystem.
The CALibration Subsystem is described in detail in
to that chapter for complete calibration and performance verification procedures.
:CALibration
[:ALL]?
:TEMPerature?
:VALue
:TEMPerature <value>
:TEMPerature?
:VOLTage <supply>,<value> Sets calibration voltage value
:VOLTage? <supply>
:VOLTage? <supply>
CALibration Subsystem
Chapter 4
of this manual. Refer
Performs complete monitor calibration.
Calibrates temperature monitoring
Sets the calibration temperature.
Returns the calibration temperature.
Returns calibration voltage value
Calibrates voltage monitoring
Programming the Enhanced Monitor
57