Status:questionable[:Event] - Agilent Technologies VXI 75000 Series User And Service Manual

STATus:QUEStionable[:EVENt]?

Returned Data
Comments
Reset Condition
Related
Commands
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The
STATus:QUEStionable:EVENt?
of the event register for the operation status group.
The event register latches positive transition events from the condition register. A
positive transition occurs when a condition makes a transition from a low to a high
state. Bits in the event register are latched, and once set, they remain set until cleared
by a
STATus:QUEStionable:EVENt?
buffering; so while an event bit is set, subsequent events corresponding to that bit are
ignored. Event registers are read only.
Type Range Default
int16 0 - 32767 none
•
Refer to
STATus:QUEStionable:CONDition?
QUEStionable status group.
•
Cleared by: *CLS, power-on, and by reading the event register.
*RST does not affect the status system, use *CLS to clear all event registers.
STATus:QUEStionable:CONDition?, STATus:QUEStionable:ENABle, *CLS
query returns an integer representing the value
query or *CLS (clear status). There is no
Description
Bit mask indicating which events are set (1) or cleared (0) for
the QUEStionable status group.
for a description of each bit in the
Programming the Enhanced Monitor 107