Status:questionable:current:limit <Supply>,<Value> Status:questionable:current:limit? <Supply> [,Min|Max] - Agilent Technologies VXI 75000 Series User And Service Manual

STATus:QUEStionable:CURRent:LIMit <supply>,<value>
STATus:QUEStionable:CURRent:LIMit? <supply> [,MIN|MAX]
Parameters
Returned Data
Comments
Reset Condition
Related
Commands
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The
STATus:QUEStionable:CURRent:LIMit
seven supplies in the mainframe. If it is exceeded, a warning is generated. These
values are stored in non-volatile memory.
The
STATus:QUEStionable:CURRent:LIMit?
the limits for amperage in the mainframe.
Name Type Range
<supply> enum. P24, P12, P5, N2,
N5PT2, N12, N24
<value> float32 -1000 to 1000,
MIN, MAX
optional enum. MIN
parameter MAX
Type Range
float Current limit for <supply>.
•
Power Supply Maximums:
Power Supply
•
This command corrects the polarity of <value> to match the specified
<supply>. It then determines if <value> is within the valid range for the
specified <supply>; if it is not, the limit is set to MAX. No error is generated.
•
Remember to execute a
This will move them into non-volatile memory.
*RST resets register the last value saved by the SYST:NVS command.
SYSTem:NVSave
sets the limit for amperage on one of the
returns a floating number representing
Default
none
Min is either
+1.0 or -1.0;
see table below
for MAX
Description
Agilent
E8402
P5 50A
P12 6A
N12 – 4A
P24 4A
N24 – 4A
N5PT2 – 20A
N2 – 10A
after setting all the limits you desire.
SYSTem:NVSave
Programming the Enhanced Monitor
Description
Indicates which power supply
current limit is being set. P5 is
positive 5 Vdc supply, N12 is
negative 12 Vdc supply, etc.
Current limit. Each supply has
its own maximum. Use
negative value for negative
supplies.
Returns maximum or minimum
current limit.
Agilent
E8404
90A
15A
– 15A
15A
– 15A
– 60A
– 30A
105