History:voltage:maximum? <Supply> History:voltage:minimum? <Supply - Agilent Technologies VXI 75000 Series User And Service Manual

HISTory:VOLTage:MAXimum? <supply>
HISTory:VOLTage:MINimum? <supply>
Parameters
Returned Data
Comments
Error Conditions
Reset Condition
Related
Commands
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
HISTory:VOLTage:MAXimum?
the maximum voltage measured by the Enhanced Monitor for the <supply> since
either manufacture of the mainframe or the most recent
.
HIST:RES:ALL
HISTory:VOLTage:MINimum?
the minimum voltage measured by the Enhanced Monitor for the <supply> since
either manufacture of the mainframe or the most recent HIST:RES:VOLT or
.
HIST:RES:ALL
Name Type
<supply> enum. P5, P12, N12, P24,
N24, N5PT2, N2,
P5STby
Type Range
float. Minimum or maximum voltage.
•
The maximum and minimum voltage tracking can be zeroed by the
commands.
HISTory:RESet
The following table lists the most common error conditions and causes. Error
numbers and corresponding messages can be found using
Number Message
-224 "Illegal Parameter"
-311 "Memory error"
A *RST has no effect on the HISTory subsystem.
HISTory:VOLTage:CMAXimum?, HISTory:VOLTage:CMINimum?,
HISTory:VOLTage:[HISTogram]?, HISTory:RESet:VOLTage,
HISTory:RESet[:ALL]
<supply> returns a single floating point number for
<supply> returns a single floating point number for
Range Default
none selects the power supply for the
maximum voltage request. P5 is
positive 5 Vdc supply, N12 is
negative 12 Vdc supply, etc.
Description
Probable Cause
the <slot> parameter was not correct.
the historical data's memory is not available.
Programming the Enhanced Monitor
or
HIST:RES:VOLT
Description
query.
SYSTem:ERRor?
87