Display[:Window]:State <State> Display[:Window]:State - Agilent Technologies VXI 75000 Series User And Service Manual

DISPlay[:WINDow]:STATe <state>
DISPlay[:WINDow]:STATe?
Parameters
Returned Data
Error Conditions
Reset Condition
60 Programming the Enhanced Monitor
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
DISPlay[:WINDow]:STATe
AUTO). is the default, and means the display is always on when the mainframe
ON
is powered up. disables the display window and it is dark.
OFF
Display in screen saver mode where the display will turn off when no keys are
pressed for 10 minutes.
DISPlay[:WINDow]:STATe?
data is a string (enumerated); either ON, OFF, or AUTO.
Name Type
<state> enum. ON,OFF,AUTO
Type Range
enum ON,OFF,AUTO
The following table lists the most common error conditions and causes. Error
numbers and corresponding messages can be found using
Number Message
-109 "Missing Parameter"
-221 "Settings Conflict"
-224 "Illegal Parameter"
At *RST, DISPlay[:WINDow]:STATe is set to ON.
sets the state of the mainframe's display (ON, OFF,
returns the state of mainframe's display. The returned
Range Default
ON
Description
State of Display
Probable Cause
The <state> parameter was omitted.
The mainframe's power is off.
The <state> parameter was not correct.
places the
AUTO
Description
State of Display
query.
SYSTem:ERRor?
Chapter 3