Status:questionable:voltage:event - Agilent Technologies VXI 75000 Series User And Service Manual

STATus:QUEStionable:VOLTage:EVENt?

Returned Data
Comments
Reset Condition
Related
Commands
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
The
STATus:QUEStionable:VOLTage:EVENt?
the value of the event register for the VOLTage status group.
The event register latches transition events from the condition register as specified
by the transition filter. In general, a transition event occurs when a condition makes
a transition from a low to a high state AND the event has been enabled with the
STATus:QUEStionable:VOLTage:PTR
+5Vdc can be set to transition on a high to low. Bits in the event register are latched,
and once set, they remain set until cleared by a
query or *CLS (clear status). There is no buffering; so while an event bit is set,
subsequent events corresponding to that bit are ignored. Event registers are read
only.
Type Range Default
int16 0 - 32767 none
•
Refer to
STATus:QUEStionable:VOLTage:CONDition?
each bit in the VOLTage status group.
*RST does not affect the status system, use *CLS to clear all event registers.
STATus:QUEStionable:VOLTage:PTR,
STATus:QUEStionable:VOLTage:ENABle, *CLS
query returns an integer representing
command. The 5Vstdby and the external
STATus:QUEStionable:EVENt?
Description
Bit mask indicating which events are set (1) or cleared (0) for
the VOLTage status group.
Programming the Enhanced Monitor
for a description of
121