System:communicate:serial[:Receive]:Pace <Pace> System:communicate:serial[:Receive]:Pace - Agilent Technologies VXI 75000 Series User And Service Manual

SYSTem:COMMunicate:SERial[:RECeive]:PACE <pace>
SYSTem:COMMunicate:SERial[:RECeive]:PACE?
Parameters
Returned Data
Comments
Reset Condition
Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SYSTem:COMMunicate:SERial[:RECeive]:PACE
pacing (XON/XOFF) protocol. Valid parameters are XON or NONE. Default is
XON.
SYSTem:COMMunicate:SERial[:RECeive]:PACE?
pacing style for RS-232 communication. The string returned is either "XON" or
"NONE."
Name Type Range
<pace> enum XON, NONE XON
Type Range
enum XON, NONE Receiver pacing enabled or disable.
•
While ...:PACE is XON, the serial interface will send XOFF when the buffer
becomes full, and XON when the buffer is empty.
•
The XON character is Control Q (ASCII 17
Control S (ASCII 19
10
*RST resets pace to the last value saved by the SYST:NVS command.
enables or disables the receive
returns a string representing the
Default
Enables or Disable receiver pacing.
Description
, 11
10
, 13 ).
16
Programming the Enhanced Monitor
Description
). The XOFF character is
16
139