With The Instant Pilot (G4208A) - Agilent Technologies InfinityLab LC Series User Manual

12 LAN Configuration
Manual Configuration

With the Instant Pilot (G4208A)

To configure the TCP/IP parameters before connecting the module to the
network, the Instant Pilot (G4208A) can be used.
1 From the Welcome screen press the More button.
2 Select Configure.
3 Press the module button of the module that hosts the LAN interface (usually
4 Scroll down to the LAN settings.
5 Press the Edit button (only visible if not in Edit mode), perform the required
6 Leave the screen by clicking Exit.
Agilent InfinityLab LC Series 1260 Infinity II Isocratic and Quaternary Pumps User Manual
the detector).
Figure 38 Instant Pilot - LAN Configuration (Edit mode)
changes and press the Done button.
231