Usb (Universal Serial Bus) - Agilent Technologies InfinityLab LC Series User Manual

11 Hardware Information
Interfaces
5V Distribution (Future Use)
•
•
•
•
24V Distribution (Future Use)
•
•
•
•
•
•

USB (Universal Serial Bus)

USB (Universal Serial Bus) - replaces RS232, supports:
•
•
Agilent InfinityLab LC Series 1260 Infinity II Isocratic and Quaternary Pumps User Manual
Available directly after turning on the hosting module (assures that the
firmware can detect certain basic functionality of the device).
For digital circuits or similar.
Provides 500 mA maximum.
Short-circuit proof with automatic switch off (by firmware).
Available by firmware command (defined turn on/off).
For devices that need higher power
• Class 0: 0.5 A maximum (12 W)
• Class 1: 1.0 A maximum (24 W)
• Class 2: 2.0 A maximum (48 W)
Class depends on hosting module's internal power overhead.
If a connected device requires more power the firmware detects this
(overcurrent detection) and provides the information to the user interface.
Fuse used for safety protection (on board).
Short circuit will be detected through hardware.
a PC with control software (for example Agilent Lab Advisor)
USB Flash Disk
211