13
LAN Configuration
Manual Configuration
With the Instant Pilot (G4208A)
To configure the TCP/IP parameters before connecting the module to the
network, the Instant Pilot (G4208A) can be used.
1 From the Welcome screen press the More button.
2 Select Configure.
3 Press the module button of the module that hosts the LAN interface
4 Scroll down to the LAN settings.
5 Press the Edit button (only visible if not in Edit mode), perform the required
6 Leave the screen by clicking Exit.
282
(usually the detector).
Figure 48
Instant Pilot - LAN Configuration
changes and press the Done button.
1290 Infinity Quaternary Pump User Manual