Agilent Technologies InfinityLab LC Series User Manual page 205

11 Hardware Information
Interfaces
Table 22 Agilent InfinityLab LC Series Interfaces
Module
Fraction Collectors
G7158B
G7159B
G7166A
G1364E/F, G5664B
Others
G1170A
G7116A/B
G7122A
G7170B
The detector (DAD/MWD/FLD/VWD/RID) is the preferred access point for
NOTE
control via LAN. The inter-module communication is done via CAN.
•
•
•
•
•
•
Agilent InfinityLab LC Series 1260 Infinity II Isocratic and Quaternary Pumps User Manual
CAN USB LAN
(on-board)
2 Yes Yes
2 Yes Yes
2 No No
2 Yes Yes
2 No No
2 No No
No No No
2 No No
CAN connectors as interface to other modules
LAN connector as interface to the control software
RS-232C as interface to a computer
USB (Universal Series Bus) as interface to a computer
REMOTE connector as interface to other Agilent products
Analog output connector(s) for signal output
RS-232 Analog APG (A)
/ ERI (E)
No No E
No No E
No No No
No No E
No No No
No No No
Yes No A
No No No
Special
Requires a host module
with on-board LAN with
minimum FW B.06.40 or
C.06.40, or with additional
G1369C LAN Card
THERMOSTAT for G1330B
Requires a host module
with on-board LAN or with
additional G1369C LAN
Card.
Requires a host module
with on-board LAN with
minimum FW B.06.40 or
C.06.40, or with additional
G1369C LAN Card
205