Miele G500 Technical Information page 83

G500 Dishwashers
4.1.8 Auxiliary Programs
The following auxiliary programs are available:
1. Programming mode:
With this program, the appliance can be customized by including
optional functions such as an additional rinse or altering program
times to take connection to a hot water supply into account.
2. Service mode:
This mode is only available to service technicians and includes the
following:
a) Error message mode:
b) Program duration display mode:
c) Program step display:
d) Component test program:
4.1.9 Temperature Switching Step Tables – G595SC
Thermostop positions are indicated in the closing plan on the circuit
diagrams for model G595SC by ZT1/Tab, ZT2/Tab, ZT3/Tab and
ZT4/Tab. The duration of these positions is determined by:
a) The electronic module (EPW 531 or EPW 532) heater rating
programming.
b) The selected program.
c) Cold or hot water intake.
If two dashes appear in the display, this program can be called up
to access an error message code which will be of help in locating
faults in the electronic circuitry.
This program is intended to help home economists illustrate
varying program lengths.
This program is used to switch from a time display to a program
step display.
This is not a washing program. Strategic positions within a normal
program have been selected to enable the technician to check the
major components quickly and systematically.
83
Technical Information