Miele G500 Technical Information page 65

G500 Dishwashers
3.2.2.3 Setting the Dispensing Rate
The adjuster; refer to Figure 3-9, Item 1, in the opening has settings from
1 – 6 cm
Figure 3-9: Setting the Dispensing Rate
1. Use a higher setting if flecks are left on glasses after drying.
2. If smearing appears on crockery, use a lower setting.
3.2.2.4 Adding Rinse Aid
The Rinse aid level indicator; refer to Figure 3-8, Item 1, is graduated to
show the amount of liquid left in the storage reservoir. The reservoir must
be topped up when the eye of the indicator is no longer dark.
Depending on the model, there may be an additional "Rinse aid" indicator
in the fascia panel.
3.2.3 Program Selection
Programs are selected using the switches on the fascia panel. The
configuration of knobs and switches varies from model to model. There
are, however, three basic types of fascia panels, grouped according to
switch configuration:
Dual-knob controls
Single-knob controls
Light-touch switches (Super Electronic version)
3
. The standard factory setting is 2 cm
65
Technical Information
3
.