Miele G500 Technical Information page 70

Technical Information
3.2.3.5 Selection of Additional Options
Immediately after selecting a washing program, two additional program
options can still be selected.
1. "Without drying"
In all programs, with the exception of "Cold" and "Short 45°", drying is
carried out using the "Turbothermic Plus" drying facility.
When "Without drying" is chosen, the "Turbothermic plus" drying
facility is no longer operative, the "Drying" LED on the fascia panel no
longer lights up and the washing program is shortened by
approximately 12 min.
2. "Pre-selection 1-9 hrs"
The start of a pre-selected program can be delayed by up to 9 hours
in order, for example, to make full use of cheap-rate electricity.
a) Select a program. The length of the selected program in minutes
b) Press "Pre-selection 1-9 hrs" an appropriate number of times. The
Once the stipulated amount of time has expired, the program is
started automatically and the display reverts to showing the remaining
length of the current program.
appears in the digital display.
start of the selected program will be delayed by one hour each
time the button is pressed and displayed as follows:
Press "Pre-selection 1-9 hrs" 1x = 1 hour delay
1 appears in the display
Press "Pre-selection 1-9 hrs" 2x = 2 hour delay
2 appears in the display, etc.
70
G500 Dishwashers