Miele G500 Technical Information page 118

Technical Information
6.1.2.4 Program Step Display
Figure 6-10: Program Step Display
a) With the dishwasher switched off:
1. Press "Short 45°" and "Cold" together and at the same time
2. Select a program.
The remaining program duration is now indicated in the digital display.
3. Press "Pre-selection 1-9 hrs".
The digital display now indicates the exact program step.
Note:
The selected program now continues through to the end with the display
showing the program step reached at any given time and not the length
of the program left. When "Pre-selection 1-9 hrs" is pressed, the
program progresses to the next step. This switch can be used to move
quickly through to the end of the program or to reach a specific program
step.
The display only reverts to display the remaining program duration if the
door is open and closed again.
b) With a program already running:
1. Open the dishwasher door.
Press "Short 45°" and "Cold" together and at the same time switch
2.
the dishwasher on again. By using this method, the program step
display is accessed directly. The selected program continues through
to the end.
3. By pressing "Pre-selection 1-9 hrs" it is possible to switch manually
from one program step to the next, thereby speeding up the process.
The display only indicates the remaining program duration again if the
door is opened and closed again.
switch the dishwasher on again.
118
G500 Dishwashers