Miele G500 Technical Information page 35

G500 Dishwashers
Figure 2-7: Height Adjustment
Level the rear feet using a Phillips screwdriver (refer to Figure 2-7 –
Height Adjustment). Turning clockwise raises the dishwasher. Turning
counterclockwise lowers the dishwasher.
Several turns of the screw are necessary to raise or lower the appliance
by 1 mm.
The front feet can be adjusted by hand by tilting the machine and
pressing against the serrations on the feet with a screwdriver. Skids are
supplied as standard on all built-under models.
2.2.4 Adjusting the Dishwasher Front
Refer to Section 2.1.1 – Front Panel
2.2.5 Adjusting the Plinth Height
Refer to Section 2.1.2 – Alterations to the Plinth Height
35
Technical Information