Miele G500 Technical Information page 48

Technical Information
Figure 2-21: Drilling the Pocket Hole
3. Hang the door panel onto the dishwasher door by inserting the
protruding screw heads through the inverted "keyholes" and then
raising the door panel – refer to Figure 2-22 – Hanging the Door
Panel.
Hold the door panel tight and open the dishwasher door. Align the
door panel and tighten the screws.
Close the dishwasher door and re-check the alignment from the
outside and make any corrections necessary.
Pre-drill holes for the two additional 4 x 30 mm screws, taking care to
limit the drill depth. Alternatively, a bradawl can be used.
Figure 2-22: Hanging the Door Panel
48
G500 Dishwashers