Miele G500 Technical Information page 43

G500 Dishwashers
Fascia panels with one knob and program sequence dial surround:
Refer to Figure 2-15.
1. Fit the vent grill (Item 1).
2. Fit the knob surround and the program sequence dial with their
markings facing the front (Item 2).
3. Slip the fascia panel (Item 3) over the side switch panel and fit into
place. Secure with 6 screws from the inside.
4. Fit the switch knob (Item 4).
Figure 2-15: Fascia Panels with One Knob and Program Sequence Dial
Surround
43
Technical Information