Miele G500 Technical Information page 119

G500 Dishwashers
6.1.2.5 Component Test Program
When this option is selected, the "Cold" program has a completely new
program sequence, i.e. it is no longer an ordinary dishwashing program!
The program is compiled in such a way as to ensure that only strategic
steps are selected with the aim of checking important electrical
components in the machine quickly and effectively.
Figure 6-11: Component Test Program
1. Switch the dishwasher off.
2. Press "Short 45°" and "Cold" together and at the same time switch
the machine on again.
3. Select the "Cold" program.
The duration of the test program is indicated in the display.
4. To start the component test procedure, press "Pre-selection 1-9 hrs".
The display now shows the first program step to be checked.
Note:
The component test program automatically runs through to the end. By
pressing "Pre-selection 1-9 hrs" however, it is possible to switch manually
from one position to the next to speed up the process.
The components checked at the various program positions can be
identified by comparing the position numbers with those in the wiring
diagram.
119
Technical Information