Miele G500 Technical Information page 117

G500 Dishwashers
6.1.2.2 Cancelling an Error Message
Once a fault has been dealt with, the error message must be cancelled as
follows:
Figure 6-8: Cancelling an Error Message
1. Switch off the dishwasher.
2. Access the programming mode by pressing "Short" and "Without
drying" together and at the same time switch the machine on again.
3. Press "Pre-selection 1-9 hrs" twice to cancel the error message.
6.1.2.3 Accessing the Program Duration Display Mode
This program enables both the service technician and the home
economist to illustrate varying program lengths with practical examples.
Figure 6-9: Accessing the Program Duration Display Mode
1. Switch the dishwasher off.
2. Press the "Short 45°" and "Cold" together and at the same time
switch the machine on again.
3. Select a program.
4. All program durations can be displayed one after the other by
pressing the respective switches, either with or without drying.
Note:
Do not press "Pre-selection 1-9 hrs" otherwise the program last
selected will automatically be started.
117
Technical Information