Miele G500 Technical Information page 115

G500 Dishwashers
Technical Information
6.1.2 Service Mode
There are two ways of accessing the service mode:
Figure 6-4: Accessing the Service Mode when Dishwasher is Switched Off
1. Press the "Short 45°" and "Cold" and at the same time switch the
machine on.
Figure 6-5: Accessing the Service Mode when Dishwasher is Switched On
1. Open the dishwasher door.
2. Press "Short 45°" and "Cold" and at the same time close the
appliance door.
In both cases, the service mode is operative and is indicated by the red
"Water inlet" and "Water outlet" lights.
The service mode can be used in a variety of ways:
- To access the error message mode (refer to Section 6.1.2.1)
- To access the program duration display mode (refer to Section 6.1.2.3)
- To access the program step display (refer to Section 6.1.2.4)
- To start the component test program (refer to Section 6.1.2.5)
115