Miele G500 Technical Information page 129

G500 Dishwashers
d) Check temperature limiter 1F2
1. The temperature limiter must be marked with "L 83", indicating
that the cut-out temperature is 83°C.
2. The position of the temperature limiter must be identical with that
indicated in Figure 6-21, Item 2.
3. There should be no traces of heat-transfer paste between the
temperature limiter (Figure 6-22, Item 3) and the cabinet base
(Figure 6-22, Item 1).
4. For optimal temperature limiting, a self-resetting version without a
plastic cap (Figure 6-22, Item 2) and without heat-transfer paste
should be fitted – refer to Figure 6-23.
Figure 6-21: Dishwasher Base – Checking the Temperature Limiter 1F2
129
Technical Information