Miele G500 Technical Information page 49

G500 Dishwashers
Figure 2-23: Door Panel Dimensions
4. Insert the screws with plastic spacer sleeves – refer to Figure 2-24 –
Inserting the Screws and Adapters, Item 1.
If the front panel is not flush with the neighboring units, further
alignment of 1 5 – 5 mm is possible by inserting the adapters provided
between the door outer panel and the front panel – refer to Figure 2-
24, Item 2.
Break off any excess length.
Figure 2-24: Inserting the Screws and Adapters
5. Close the holes on the inside of the door inner panel with the plugs
provided.
49
Technical Information