Miele G500 Technical Information page 77

G500 Dishwashers
3.2.5.4 Cleaning the Water Inlet Filters
A filter is fitted at the entrance to the water inlet hose to protect the water
inlet valve. If this filter is clogged, insufficient water will be taken into the
machine.
1. Disconnect the machine from the electrically.
2. Turn off the water supply at the stopcock and unscrew the inlet valve.
3. Remove the washer.
4. Remove the filter using a pair of pointed pliers and clean.
5. Replace the filter and the washer. It is important that the washer is
fitted correctly!
6. Screw the valve to the stopcock, taking care not to damage the
thread.
7. Turn on the water supply.
8. Tighten the fittings if water leaks out.
Figure 3-21: Cleaning the Water Inlet Filters
77
Technical Information