Fault Diagnosis - Miele G500 Technical Information

Technical Information
6.0

Fault Diagnosis

6.1 Controls G595, G598
A description of the function of the components described in this section
and instructions on how they are removed, repaired and replaced can be
found in Section 4.1 and 5.5, respectively.
The following additional programs intended as an aid to servicing are
available to service technicians on models G595 and G598.
Programming mode
Service mode
Error message mode
Program duration display mode
Program step display
Component test program
6.1.1 Programming Mode
This feature offers a degree of customization by allowing additional
functions such as interim rinses, connection to a hot water supply, etc., to
be added to the basic programs ("Intensive", "Universal", etc).
Note:
This leads to alterations to the length of programs!
6.1.1.1 Accessing the Programming Mode
Figure 6-1: Accessing the Programming Mode
1. Switch off the dishwasher.
2. Hold down "Short 45°" and "Without drying" and at the same time
switch the appliance back on again.
3. The microcomputer's program index (P0, P1, ...) appears in the digital
display.
110
G500 Dishwashers