Miele G500 Technical Information page 60

Technical Information
3.1.2.1 Raising Water Levels
Use a small coin to switch on level-controlled water intake at the middle
switch – refer to Figure 3-5.
Figure 3-5: Level-Controlled Water Intake Switch
Note:
For Super-Electronic models, refer to Section 3.2.4 – Optional Functions.
Note:
(G570, G575, G580)
On these models, a wire bridge must be fitted to the timer as indicated in
the relevant wiring diagram.
Note:
If a higher water level is selected then the water hardness setting must
be set one step higher – refer to Section 3.1.1.
3.1.3 Trial Run
A first trial run is automatically carried out when water levels are checked.
During the course of a further test, checks should be carried out for leaks
in the Machine (Waterproof system) and in the drainage system, and care
should be taken that neither inlet nor the drainage hoses are kinked.
Similarly, any irregularities in the noise patterns of the revolving spray
arms should be noted.
60
G500 Dishwashers