Miele G500 Technical Information page 38

Technical Information
2.2.7 Aligning and Securing the Dishwasher
In order to ensure stability, the dishwasher must be firmly secured to the
worktop once it has been correctly aligned and leveled.
Press the approx. 60 cm long sponge rubber seal supplied with the
machine into the gap between the top of the dishwasher and the worktop,
refer to Figure 2-5 – Worktop Edge Protection, Item 3. Open the
dishwasher door and secure the dishwasher using the 4 x 15 mm screws
supplied inserted through the holes in the top left and right-hand corners,
refer to Figure 2-10 – Securing the Dishwasher.
Figure 2-10: Securing the Dishwasher
If it is not possible to secure the dishwasher at the points indicated
because of the cut-out for a sink or other obstacle, the brackets supplied
should be used as indicated in Figure 2-11 – Using Brackets to Secure
the Dishwasher, Item 1.
38
G500 Dishwashers